W11- 6mm*2500mm Upper Roller Universal Steel Plate Rolling Machine
of Rolls for Trailer
1. The machine adopts 3-roller symmetrical structure with the upper
roller moving vertically in the center between the two lower
rollers, which is achieved through the drive of the screw, the unt,
the worm and the lead screw.
2. The two lower rollers rotates, and provides the plate materials
with torque through the engagement of the output gear of the
moderator with the gear of the lower rollers.
3. adapted for bending metal plate into round, arc, and so on. Its
working principle is rotary bending deformation. This product is
widely used in chemical industry, Cement,shipbuilding, boiler,
aviation, water control project, Power Transmission Tower, metal
structure and the industry of making machinery.
The Feature of Hydraulic Plate Rolling machine
1. High precision pre-bending, freely setup the width of plate.
Upper roller presses the plate end for pre-bending.
2. Upper roller likes drum with collaboration of carrier roller
permit continual bending of any thickness of plate.
3. Safe work, fixed two down roller, upper roller does horizontal
and vertical movement, and the plate don’t move during upper roller
4. Unitary structure, convenient to move the whole machine as
machine has a hardy under pan. No need to anchor bolt.
5. Different use has different control way, like top numerical
control and below numerical control.
6. Through exclusive technology, AccurL can develop cones as easily
as competitive machines can develop cylinders. And it eliminates
scarring on the surface of shell or roll and also eliminates, in
most cases, the need for grinding the lamination (bullnosing) on
the minor diameter edge.
CNC control system
1. Special bending aircraft, numerical control.
2. HMI (human machine interface), intelligent operation.
3. Self-compensating, single operate, high efficiency, safe and
4. Many models for choice, economic numerical control model, TC
computerized numerical control.
Packing & Delivery
1. Our wooden case is after fumigation treatment.Needn’t timber
inspection,saving shipping time.
2. All the spare parts of the machine were covered by soms
softmaterials,mainly using pearl wool.
3. The outmost is wooben case with fixed formwork.
4. The botton of the wooden case has firm iron jack,covenient to
hading and transport.
1. More than 12 years experience for Hydraulic Press and 16 years
for sheet metal machinery
2. Total Number of Employee : 455
3. Floor Area : 56,765m^2
4. New factory area : 61,321m^2
5. Whole factory is controlled by ERP-Enterprise Resource Plan
We are producing below ranges of machines:
1. CNC Press Brake
2. CNC Laser Cutter(Validation phase)
3. CNC Punch Press(Validation phase)
4. CNC Shears
5. Hydraulic Press
6. Pipe&Roller Bender
7. Iron Worker
8. Automatic Production line
|Model||ACCURL W11-6x2500 (2500m x 6mm)|
|Product Name||plate rolling machine|
|Max. Plate thickness||6 mm|
|Max. Prebending thickness||4 mm|
|Max.Plate width||2500 mm|
|Roll Speed||5.6 m/min|
|Min.diameter of Max. Plate thickness||450 mm|
|Upper roller diameter||230 mm|
|Bottom roller diameter||200mm|