Metal Frame Cnc Sheet Metal Press Brake Machine 300 Ton
CNC Press Brake Description:
1. Equipped with special controller with automatic test and
2. Programming a product simply consists of introducing the
characteristics of the material to be bent, the dimensions of the
product and the necessary tooling & die.
3. The optimizing software searches for the best bending cycle.
4. RAM stroke(Y1, Y2) and backgauge (X, R, Z) are controlled by
controller automatically, high productivity.
5. Adopting Electro-hydraulic proportional servo synchronization.
6. Optional point within stroke can be controlled. Repeat precision
of Y axes: ± 0.01mm, Parallism: 0.02mm.
7. Strong ability of deviation resistance. Backgauge adopts
ball-bearing screw and rolling guideway, quick speed and high
repeat positioning precision.
8. X axes with resolution 0.1mm. Imports including linear
transducer, pressure proportional valve and servo motor.
The models are available in variety of tounge from 40 ton up to
1000 ton and length from 2000 mm up to 8000 mm. The specifications
below 300 ton refer to Series Euro-Pro B. Any tailor-made are
available on request.
Features for CNC Press Brake:
CNC Synchro Euro-Pro B Series Press Brake
Descriptions of CNC Synchro Press Brake:
-A complete electrolyte servo synchro CNC (Computer Numerical
Control) controlled press brake.
-Adopt Bosch electrolyte servo system (from Germany)
- Two light rulers are installed at the two ends of the slide,
making the slide movement be parallel to the working table
- Adopt the working table compensation structure.
- The CNC servo motor of the back gauge gives a high positioning
- The DA69 computer imported from Holand Delem Co.
- Automatically calculate the working time and quantities of press
- For single step operation, the user only needs to input the
relevant data into the system, and then the system will check out
the pressure needed for press brake and get every thing in order.
- When making several steps press brake actions on the parts, the
user just needs to input the intended dimensions into the system,
and then the system can make continuous press brake actions
according to the requirements.
- Can store 25 press brake procedures.
- Give alarm signals on incorrect operations
- Automatically control the following datum: Pressure discharge
time, pressure keeping time, press brake pressure, press brake
angle, the opening height of slide and etc.
Synchro control system:
-Two light rulers (Y1-Y2) have been installed at the two sides of
the machine to measure the exact distances.
-The position data will be delivered to the CNC system and then it
can check out the servo valve control signal (S2-S2).
- High-precision ball screw and linear guide-way
- Panasonic HINAS A4 series; AC servo motor and drive;
-WILA deflection compensation;
-Automatic worktable compensation for wear and tear of the bed
The deviation resistance ability of the machine tool:
-The electrolyte servo system of this forging machine is an inner
closing ring control system, which can check out the synchro
discrepancies of the slide by the movement of the light ruler.
-The electrolyte servo valve can correct the slide discrepancies,
making the slide parallel to the working table.
Specifications for CNC press Brake:
|1||Type||Cnc Sheet Metal Press Brake Machine|
|2||CNC Control Axis||Y1-Y2-X-R-Z1-Z2-axis & Crowning|
|4||Bending length||6000 mm|
|5||Throat Depth||400 mm|
|6||Beam Stroke||250 mm|
|8||Fast Speed||150 mm/s|
|9||Work Speed||0~10 mm/s|
|10||Return Speed||100 mm/s|
|11||Oil Capacity||345 Lts|
|12||Back Gauge Stroke||1000 mm|
|13||Motor Power||30 KW|
|14||Total Length(A)||7000 mm|
|15||Total Height(B)||3880 mm|
|16||Total Width(B)||2100 mm|
|17||Distance Between Frames||5100 mm|
|18||Heigth Under the Floor||1200 mm|
|19||Machine weight||31000 kg|